在线观看国产一区二区三区-国产av仑乱内谢-正在播放东北夫妻内射-日本大片免费高清大片-一本色道无码不卡在线观看

During the process of repairing car paint, there is sometimes a phenomenon where the paint film is dull and shiny, but after monotony, the gloss may gradually fade. What is the common cause of this phenomenon? A brief analysis of the reasons for the Guangzhou automotive paint coating manufacturer and everyone is as follows:

1. The adhesion of the primer is poor, and perhaps the topcoat is sprayed on it before the primer has fully cured;

2. The paint mixing ratio is not correct, for example, the curing agent is not good, perhaps there are too many diluents;

3. The diluent used in the paint may have poor quality curing agents, or may have used incompatible products;

4. Improper spraying method;

5. If the temperature is too high or too low, it may lead to slow monotonic speed, solvent evaporation, and car exhaust invading the surface of the paint film;

6. The surface of the paint film is not treated clean;

7. Strong cleaning agent applied to newly sprayed paint film, or premature polishing

Based on the above reasons, suggestions are as follows:

1. Apply qualified primer and wait for the primer to become fully monotonous before applying the topcoat;

2. It is recommended to use matching products from the same manufacturer for better coating and spraying effect;

3. Allocate and mix thoroughly according to the technical instructions provided by the manufacturer in proportion;

4. Use the correct spraying method;

5. Before spraying, it is necessary to completely treat the base and paint film surface to ensure cleanliness, and dry the cleaning agent with a dry cloth;

6. Ensure that the environmental conditions meet the requirements of painting and spraying;

7. Do not use strong cleaning agents on the surface of newly sprayed paint films, and do not polish until the paint film has fully cured

Article origin: Advertising logo paint http://www.jinliangxincai.com